DT Tool Holders
We produces a carbide inserted box tool bit and carbide inserted stick tool bit for automatic screw machines and lathes. The screws are standard button-head screws that have been turned for chip clearance. The turned screw can be purchased from DT Tool Holders. The alien wrench is a standard ball driver. We recommend a CNGP or CNMP type insert for our holders and they can be purchased from us or your local supplier. The insert received with the purchase of a DT Holder is coated and works well on the harder metals such as 8620 and stress proof material. It is not recommended to take over (1/2) the insert on the depth of cut. These holders will save you the time it takes to take the tool out, grind the tool, replace it and get it back on center. Just turn or change the insert. The first shift will pay for the holder and the next shift will pay for a box of inserts. REMEMBER: If it's not running, it's not making MONEY.

 Back to the Tool List

  If you have any questions about our signs, please call 1-800-430-3101 or 1-417-471-1047