Tool List
	INTRODUCING THE REVOLUTIONARY Click Change Insert Holder The long awaited answer to the problem of carbide insert changes.  Now an inexperienced operator can change an insert in seconds!  And without using any tools.  It's a snap!  This tool holder will pay for itself in just days of operation, not months or years.  See the chart below to get an idea of your potential payback. AVAILABLE IN CNMG, WNMG, VNMG... AND MORE ON THE WAY.
The following insert holders will save you the time it takes to take the tool out, grind the tool, replace it and get it back on center and to the size you were at before you took it out.  Just turn or change the insert.  About DT Tool Holders  We offer a 30 day free trail on all of our insert holders.
	Inserted Box Tools   Patent No. (5647701) The DT Inserted Box Tool Bit was originally designed for mutl-spindle screw machines and came in two sizes. Currently we have expanded the range of sizes from 1/4" holders up to 5/8" holders. You can order holders from 1/4" through 1/2" that use a CNMP-321 insert, or you can order holders from 3/8" through 5/8" that use a CNGP-430 insert. Standard sizes and custom sizes available. We recommend the CNMP or CNGP type insert for our holders and they can be purchased from us or your local supplier. It is not recommended to take over (1/2) of the insert on the depth of cut. These Insert holders will save you the time it takes to take the tool out, grind the tool, replace it and get it back on center. Just turn or change the insert. If your using tools that chip and burn up the rollers, these tools will help save the life of the rollers.
	Inserted Stick Tool The DT Inserted Stick Tool Bit uses the same insert as the DT Box Tool Bit. They work well in the automatic screw machine knee tool holders. When roughing stock off before forming and shaving. This tool will help save the life of your form tool and shave tool. These tools can also be used for facing off the cross slide. The DT stick tools work excellent were ever you use them. You can take up to 1/2 the size of the Insert on the depth of cut. Standard sizes and custom sizes available. These holders will save you the time it takes to take the tool out, grind the tool, replace it and get it back on center. Just turn or change the insert.
	Inserted Brake Lathe Tool Originally designed for the automotive brake lathe, the DT Tool Holder Brake Lathe Tool has been an excellent compliment to the DT Tool Holder line of quality tool holders. Standard sizes and custom sizes are available. These holders will save you the time it takes to take the tool out, grind the tool, replace it and get it back on center.  Just turn or change the insert. When the insert has been used in the right side holder, you can move the insert to the left side holder or left to right and you have 4 more cutting edges to use on each insert, for a total of 8 sides.

 

 Terms & Conditions | Application for Credit

If you have any questions about our signs, please call 1-800-430-3101 or 1-417-471-1047